Archive for the ‘Hydraulic Hose Fitting’ Category

Safety Measures When Working With Industrial Hoses

Friday, December 1st, 2023

Originating from simple designs, industrial hoses have evolved into complex systems integral to numerous industries. Their role in transporting various substances, from gases to liquids, underlines the necessity of handling them with the utmost care and precision. This blog delves into the essential safety measures and best practices for working with industrial hoses to ensure a safe and efficient work environment.

Identifying Potential Hazards with Industrial Hoses

When working with industrial hoses, it’s important to be aware of potential hazards that can compromise safety and efficiency. Here are key points to consider:

  • Visible Wear and Tear: Look for any signs of deterioration such as cracks, thinning or bulging.
  • Leakage: Check for any wet spots or drips that indicate a leak in the hose.
  • Abrasion Marks: Noticeable abrasion on the hose surface can be a sign of excessive wear.
  • Crushed or Flattened Sections: Indicate potential internal damage and blockages.

What Are the Essential Safety Checks Before Using Industrial Hoses?

Before using industrial hoses, it’s important to perform several safety checks. Ensure the hose is suitable for the intended application, particularly in terms of material compatibility and pressure ratings. Conduct thorough inspections for cracks, leaks or wear before each use. Check for any physical damage, such as cracks or abrasions and ensure all connections are secure. It’s also important to verify that the hose has not surpassed its service life.

Best Practices for Safe Handling of Industrial Hoses

Here are some guidelines for the safe and effective handling of industrial hoses:

Proper Storage

Store hoses away from sharp objects and in a manner that prevents tangling.

Regular Training

Ensure all personnel are trained in correct hose handling and operation procedures.

Avoid Excessive Bending

Prevent bending the hose beyond its minimum bend radius to avoid damage.

Pressure Management

Regularly check and maintain the correct operating pressure to avoid hose failure.

The Importance of Regular Hose Maintenance

Regular maintenance extends the life of industrial hoses and ensures safe operation. It involves routine inspections, proper storage and immediate repairs of any detected issues. Rely on professionals to identify potential problems before they lead to accidents or equipment failure.

Seeking Reliable Industrial Supplies in Rockhampton?

By adhering to these guidelines, you can ensure the longevity and optimal performance of your hoses. It’s important to choose only high-quality products to maintain safety and efficiency in your operations. If you are looking for quality industrial hoses in Rockhampton or professional advice for safe handling, contact our team at Norosco.

Industrial Hose Maintenance: The Key to Enduring Performance

Tuesday, November 7th, 2023

In any industrial setting, the importance of maintaining equipment can’t be overstated. Among these, industrial hoses often go unnoticed until something goes wrong. But what if you could prevent those issues before they even start? This blog post will guide you through the essentials of industrial hose maintenance, why high-quality materials matter and how regular upkeep can save you money in the long run.

Role of Material Quality in Hose Maintenance

When it comes to industrial hoses, not all materials are created equal. High-grade materials are designed to withstand harsh conditions, even in extreme temperatures. These materials aren’t just about durability; they also require less frequent maintenance. This translates to fewer downtimes and more efficient operations for your business. Additionally, quality materials can better resist wear and tear from chemicals, oils and other substances, further extending the lifespan of your hoses.

Need for Scheduled Maintenance

Scheduled maintenance is your best defence against unexpected failures and costly downtimes. Let’s look at some key aspects of a well-planned maintenance schedule:

  • Routine Inspections: Regular checks can identify any wear and tear before they become major issues. Catching these early signs can save you from more extensive repairs down the line.


  • Pressure Tests: Ensuring that hoses can handle the operational pressures without leaks or bursts. This is important for maintaining the integrity of your systems and avoiding potential disasters.


  • Customised Plans: Maintenance services tailored to your specific industrial needs make sure your hoses last longer and perform better. A customised plan takes into account the unique demands of your operations, offering you the most effective maintenance solutions.

The Cost of Negligence

It’s important to remember that the costs extend beyond immediate repairs. The ripple effect of negligence can touch every corner of your operations, affecting both productivity and safety. Here are the specifics to understand the full scope of the impact:

The Price of Downtime

Neglecting hose maintenance can lead to unexpected downtimes, affecting your production schedules and, ultimately, your revenue.

Replacement Costs

Low-quality or poorly maintained hoses need frequent replacements, adding to your operational costs.

Safety Hazards

A failed hose can be a safety risk, leading to accidents that could have been easily avoided with proper maintenance.

Long-term Savings

Investing in quality maintenance services not only ensures the longevity of your hoses but also results in long-term financial benefits.

Time for Your Next Maintenance Check with Norosco?

At Norosco, we’re not just about supplying quality industrial hoses; we’re also dedicated to ensuring they perform at their best for years to come. That’s why we offer comprehensive maintenance services tailored to your specific needs. Don’t leave your operations to chance. Contact us today to schedule a consultation. Your path to operational efficiency is just a call away.

Types of Hydraulic Fittings: What to Use & When?

Thursday, September 21st, 2023

Understanding the intricacies of hydraulic systems is vital for the optimal functioning and safety of your machinery, and central to this is selecting the appropriate hydraulic fittings. These components act as connectors between the various parts of a hydraulic system, facilitating the secure flow of hydraulic fluid. Let’s take a deeper look into the types of hydraulic fittings, factors to consider when choosing them and best practices for their usage.

Understanding the Different Types of Hydraulic Fittings

Straight Fittings

Straight fittings are the most straightforward types that you will come across. They serve to extend a hydraulic line and don’t change the direction of the flow. These are commonly used in areas where you have ample space, and the tubes or hoses can run in a straight line without any hindrance.

Elbow Fittings

As the name suggests, elbow fittings allow for a change in the flow direction. They come in various angles, most commonly 45 or 90 degrees, and are vital when you need to navigate around obstacles or fit hoses in tight spaces.

Tee & Cross Fittings

Tee fittings divide the flow into two directions, whereas cross fittings can divide it into three directions. These are commonly used in more complex hydraulic systems where multiple flow paths are required.

Adapter Fittings

Sometimes, you’ll need to connect components with different sizes or standards. That’s when adapter fittings come in handy. They adjust the size and thread configuration so that you can connect components seamlessly.

Key Factors to Consider When Choosing a Hydraulic Fitting


Consider the type of fluid that will pass through the fitting, as well as the environmental conditions, to decide on the most suitable material. Ryco fittings offer a range of materials such as stainless steel and brass, providing reliable options for various applications.

Pressure Rating

Different hydraulic fittings have different pressure ratings. Always opt for fittings that can handle the maximum pressure of your hydraulic system to ensure safety and efficiency.


Make sure that the fitting is compatible with the hoses and other components in your hydraulic system. Mismatching can lead to leakage and reduce the system’s lifespan.

Best Practices for Using Hydraulic Fittings Safely

Regular Maintenance

Inspect your hydraulic fittings regularly to ensure that they are in good condition. Neglected fittings are more likely to fail and can lead to hazardous situations.

Quality Matters

Always invest in high-quality hydraulic fittings, such as Ryco fittings, to ensure a longer lifespan and better performance of your hydraulic systems.

Proper Installation

Incorrectly installed hydraulic fittings can compromise the entire system. Make sure to follow manufacturer guidelines during installation. If you’re in doubt, professional help is always recommended.

Choosing the right hydraulic fittings is not just a matter of connecting parts; it’s about ensuring that your system runs safely and efficiently. Norosco in Rockhampton is your go-to source for quality Ryco fittings, filters and accessories built to meet all your hydraulic needs. So go ahead, make an informed choice and keep that hydraulic system of yours running like a well-oiled machine.

Understanding The Types Of Industrial Hoses

Monday, May 23rd, 2022

Industrial hoses are larger and more powerful than those used for domestic works. They can also be used for a range of purposes other than simply water carrying. In this post, we’ll take a look at the different types of industrial hoses and what their applications are.

Although all of these hoses are used in an industrial environment, they each have a different use as outlined below:

Chemical fume extraction hoses

Chemical fume extraction hoses are used to remove chemical fumes from a room or area. For example, they’re often used in laboratories where chemicals are being mixed together and heated, as well as in chemical plants that have large amounts of chemicals stored or processed on-site. Chemical fume extraction hoses can be found in many other places: pharmaceutical manufacturing facilities; food processing plants; electronics manufacturing facilities; paint manufacturing facilities; adhesives manufacturing operations.

Dust collection hoses

Dust collection hoses are used to collect the dust that is produced when machines are in operation. They’re installed around a machine’s ductwork, where they pick up any dust that has been released into the air. Dust collection hoses can be made with a variety of materials, including rubber and plastic. They can also be reinforced with wire mesh or steel rings to increase their durability and longevity.

Dust collection hoses are typically used in industries where there is frequent exposure to fine particulate matter such as sanding operations or manufacturing facilities like foundries or mills (where metal such as iron ore is crushed into smaller pieces).

High-temperature hoses

High-temperature hoses are used in applications where the hose is exposed to high temperatures. These hoses are made from materials that are resistant to high temperatures, such as polyurethane, polyethylene and polypropylene. These hoses are used in applications such as aircraft engines, power plants and furnaces.

Light material handling hoses

Light material handling hoses are designed to handle light materials such as liquids and fine parts. They are used in applications where a small amount of material is being moved and require little or no pressure. These are also known as “unrated” hoses, as they do not meet the standards for use in high-pressure applications.

Light material handling hoses are used in industrial settings for food and beverage processing, storage tanks cleanup, chemical transport, lubrication systems and paint spraying equipment.

Ventilation hoses

Ventilation hoses are used to remove fumes and odours from a building. They’re used for a variety of applications, ranging from removing smoke from fires in factories to removing chemical vapours from laboratories. The materials used to make ventilation hoses depend on the application. Some ventilation hose manufacturers use PVC because it’s lightweight and inexpensive, while others prefer rubber because it’s more durable.

Each size of ventilation hose has its own purpose with some sizes being more suitable for high-pressure applications than others. Ventilation hoses are available in diameters ranging from 4 inches up to 48 inches.

For further help and advice on choosing the right industrial hoses for your needs, contact the experts at Norosco today.

How To Identify The Correct Hydraulic Hose Fitting

Tuesday, April 5th, 2022

Hydraulic hose fittings are important for machinery in a host of different industries, including construction and water and waste management. These fittings are used to connect hydraulic hoses to other equipment parts. They’re commonly made from plastic, brass, or stainless steel, depending on the industry and application. A range of fittings are available, and to ensure the machinery operates correctly and doesn’t become damaged it’s important to always select the right fitting.

If you’re not sure where to begin, read on for our guide to how to identify the correct hydraulic hose fitting.

1. Check the type of fitting

The first step is to check the type of hydraulic fitting you’re working with. It’ll either be crimped or reusable. It’s generally easy to tell the fitting type but newer equipment tends to have a crimped fitting. Reusable fittings are made up of a socket and nipple. Crimped fittings are permanently sealed using a crimping machine.

2. Find the right port connection

It’s essential that the port connection on the fitting matches the hose so that the equipment operates smoothly. If you know the type the hose connection you can easily check what the other part should be by searching online.

3. Identify the seal type

For a properly sealed and secure fitting, it’s important to identify the correct seal type. You’ll also need to note its size. Seals for hydraulic hoses are either o-rings, mated angles, or tapered threads. O-rings have the seal included. Mated angles use straight and parallel thread types with the male and female units forming the seal. Tapered threads have external threads on the male unit and internal threads on the female.

4. Determine the thread’s fitting design and size

Various types of threads are used for hydraulic fittings that each have different designs and sizes. You need to identify the thread type to choose the right hydraulic hose fitting. Some types are more commonplace in certain regions of the world whilst others are widely used internationally.

Enquire with Norosco

Once you’ve identified your hydraulic hose fitting you can order a replacement. Norosco are stockists of a wide range of hydraulic fittings and are also official distributors for Ryco. Plus we can manufacture hydraulic hose fittings to your specifications, making it easier to always find the replacement fitting you need. Enquire now for replacement hydraulic hose fittings or more guidance about identifying the right fitting.

Our Service Centre / Workshop